Aqua Barrier™ Exclusive Components
You need the Adobe Flash Player to view this animation. You can download it from the Adobe Flash Player web site.
Internal Baffle System: The patented internal baffle(s) locks into place when the
barrier is exposed to uneven water pressure. It is made of a flexible PVC material and is perforated
to allow water to flow from one cell to the next.
Pipe Loops: Pipe loops are fabricated on each end of the barrier to facilitate the
installation and removal of the barrier. Inserting a pipe through the loops allows for the attachment
of an elevated equipment arm (i.e. track hoe bucket) to maneuver the barrier during the installation
or removal process.
Fill Ports: One of the unique features of Aqua Barriers™ are threaded fill
ports which are used to inflate the barriers. These fill ports are available in 2-in ID and to 4-in
ID. Standard locations for the fill ports are in pairs 5ft-to 15ft from the end of the barrier based
on the barrier height. The fill ports can be custom installed at any location along the unit.
Drain Ports: Drain ports are available to assist in efficiently draining the barriers
for removal. These drain ports are available in 4in ID or 8in ID, and are generally located on both
sides and both ends of the barrier. Like the fill ports, the drain ports can be custom installed at
any location along the unit.
Download the Aqua Barrier™ Work Site Assessment Sheet or call us today! 1-800-245-0199
