Moving Water Installation

men using the pipe loops on an Aqua Barrier cofferdam to position it onto moving water

Installation made easy...

The pipe loops allow for easy maneuvering during the installation. Use a spreader bar technique along with a shoreline anchor during installations where moving water is present.

An Aqua Barrier cofferdam being lowered onto moving water

Installation made easy...

As the cofferdams are filled with water, use the spreader bar to simply lower the dam into the water.

When installing multiple barriers, a piece of hydraulic equipment should be used to overlap the ends. The weight of the barrier on top will keep them in place.

2 Aqua Barrier cofferdams being overlapped

Installation made easy...

During all Aqua Barrier™ installations the barriers can rotate toward the side with less water depth. The maximum movement toward the side of least water resistance is ½ of the properly inflated barrier height (i.e. 6 ft high barrier can adjust as much as 3 ft).

Download these instructions.