Exclusive Features

Aqua-Barriers™ are constructed from industrial grade vinyl coated polyester. This fabric is laminated with a base of woven polyester between two layers of flexible polyvinyl chloride. These units can be REPAIRED EASILY in the field in wet or dry conditions, are REUSABLE and provide for compact storage, transportation and ease of handling.

What sizes of Aqua-Barriers are available?

Inflated heights are 2-feet through 8-feet and standard lengths are 25-, 50-, 75- and 100-feet. Custom sized units are available upon request.

Aqua-Barrier Connections

Each inflated Aqua-Barrier™ section is straight without the ability to bend. When joining Aqua-Barrier™ sections, an OVERLAPPING TECHNIQUE is used. Place the barrier to be inflated on top of the end of the inflated barrier and begin the installation process. The amount of overlap is determined by height, as indicated in the chart below:

Inflated Height (ft/m)	Maximum Controllable Water/Sediment Depth (in/cm)	Inflated Volume (gal per linear ft/ liters per linear m)	Inflated Width (ft/m)	Connection Overlap Requirements (ft/m)
3/0.92	27/68.58	158/598	7/2.13	4.5/1.37
4/1.22	36/91.44	256/969	10/3.05	6/1.83
5/1.53	45/114.30	390/1476	12.5/3.81	7.5/2.29
6/1.83	54/137.20	564/2134	15/4.57	9/2.74
8/2.44	72/183.00	1007/3812	20/6.10	12/3.66